Having a safe, warm home is a necessity for all. Finding the best way to acquire warm and security within the home means using products that will enhance heat retention. During the 1960’s and 1970’s this meant using loose fill asbestos.
What is loose fill?
Loose fill asbestos is a form of insulation that is derived from ground up raw asbestos. In the two decades that it was used, it was easy to find and affordable. This made loose fill a very popular option in many parts of the world. It is a friable form of asbestos. This means that it is loose and easily crumbled.
Is it dangerous?
Loose fill asbestos insulation is not inherently dangerous. Although, it is suggested that a professional be called to handle it or test it. If it is left undisturbed, loose fill will not pose a danger or risk to inhabitants of the dwelling in which it is located.
If left alone loose fill poses no risk. It is when it is crunched or crumbled that risk increases. The fill will release tiny fibers that become airborne and breathed in that pose a threat to personal health. These fibers can cause great illness to those exposed to them.
Cause for worry?
Loose fill asbestos is not necessarily a bad thing. This type of insulation has excellent insulating and fire retardant properties. Risk of the fibers being disturbed is pretty low if thee areas where it is located are sealed off.
The best course of action to take if loose fill is located in a dwelling is to call a professional. They can safely gather a sample, have it tested and evaluate test results. These professionals can then offer a written course action inhabitants should take. Learn more on how to be safe from loose-fill asbestos insulation come check our site.
If you suspect your home may have loose-fill asbestos insulation somewhere in it, you may not know how dangerous that can be. Even if you do know it can be dangerous, you still may not know that you can get your home tested for it, or how to do so.
Why is loose-fill asbestos insulation dangerous? — The problem with loose-fill asbestos insulation is that it was put into buildings in very small pieces. That means, because it is not in walls and under floorboards in large sheets, small pieces of asbestos can end up in the air.
If you happen to breath in that tiny piece of asbestos, it could get lodged in your lungs. That can cause infections, breathing problems and, in some severe cases, lung cancer.
How to get your home tested for loose-fill asbestos insulation — If you have decided you need to have your home tested for loose-fill asbestos insulation, it is actually easier to do that than you may think.
Just get online and look for an asbestos testing company in your area. Contact several of them and ask for a free quote for your particular testing. Hire the one that has the best reputation and that will do it for the most reasonable price.
What will loose-fill asbestos insulation testing entail? — The actual testing is not too complicated.
Once you have arranged for a date and time for testing, the technician will arrive on that day and begin testing the air in your home for loose-fill asbestos insulation.
Once he has taken samples of air in every room, he will then take samples of fibers he finds in walls and under floors.
These samples will be taken to a lab for testing, with the results usually ready within a couple of days.
Do you live in Australia and think you may have loose-fill asbestos insulation in a building you live in or own? Are you wondering what you need to do about it?
If you do think you have loose-fill asbestos insulation in a building, under Australian law you must have it tested to find out. This is because it can be a very serious health hazard if it gets into the air.
How to get loose-fill asbestos insulation testing done? — There are companies around Australia that do testing for loose-fill asbestos insulation.
To arrange for testing, look for some of the companies on the Internet and get quotes for how much they charge for testing. In most cases, any loose-fill asbestos insulation testing is quite cheap, so do be sure to find out about the cost before you hire someone to do yours.
Once you have found a company whose prices you like, make arrangements to have them come by your home or office to do the testing.
How is loose-fill asbestos insulation testing done? — As loose-fill asbestos insulation can be anywhere in a building, a typical technician will test every room.
He will go around the building taking air samples in an attempt to find out if any loose-fill asbestos insulation has escaped into the air. He will also take samples of any insulation he finds under sinks or in wall cavities, as well as samples of any other materials he finds in sinks, in wall cracks, under floorboards and in attics.
How long to get the test results? — Once the testing has been completed, the samples will be taken to a lab for testing. This is usually complete within 24 hours, and the technician will then tell you the results.
Do you suspect loose-fill asbestos insulation may be present in your house, apartment or office? Are you not sure why people are so concerned, as well as what you should do about it if you have it?
Here are just a few things you need to know about loose-fill asbestos insulation, and why it is considered so dangerous.
What is loose-fill asbestos insulation? — This is a type of insulation that was put into homes and offices in the 1960s and 70s. It is very small pieces of insulation that was pushed into walls, crevices, attics and crawl spaces and was used to insulate tiny gaps against the weather.
Why is loose-fill asbestos insulation so dangerous? — Experts consider this substance so dangerous because it usually breaks down over time. Tiny particles then get into the air where they can be breathed into the lungs. Once in the lungs, they will attach themselves to lung tissue, eventually causing breathing problems and, in some cases, cancer.
What can you do if you think you have it? — If you live in Sydney, Australia, under Sydney law you must have your building tested for it if you believe it was installed there.
If it is discovered, you will then be referred to a task-force who will tell you what your options are. In most cases, however, you will have to sell your building to governmental authorities who will then make arrangements to tear it down. You will, of course, be compensated for the value of your property.
Why is this mandatory? — There is not a safe way to remove loose-fill asbestos from your building except by tenting the entire area and then demolishing it. This is why the government in Sydney gives you no choice.
Get Loose-Fill Asbestos Insulation Put In
You should always be careful to do what is right for your home, and if you feel that loose-fill asbestos insulation could be good for your place, then you should have this done in your home. Get everything done there in the best way, and make sure that you always stay on top of things, and your home will be just how you want it to be.
Ask Your Friends For Advice
If your friends and family have advice to give you on how to care for your home, then you should take it. You will be so much better because of the way that they will help you out with all of this, and you will be glad that your home will receive such good care thanks to them and their advice. You will know if loose-fill asbestos insulation is best for you when you ask your family and friends about it, and you will be happy for all of the advice that they will give you.
You Will Like How Things Turn Out
You will be glad when things turn out well in your home, and you will have your friends, family, and your own good judgement, to thank for that. You will feel relaxed about how everything gets done when you ask for advice and take it. There is so much good that can be done in your home, and when you decide to use something like loose-fill asbestos insulation, you will feel really good about how everything is going in your home and the way that you have cared for your place.
Loose fill abestos was a very popular form of insulation to use in the 1960’s and 1970’s. Many new homes had this type of insulation blown into their walls and ceilings to aid in keeping the dwelling warm. The concern today is whether or not this asbestos based insulation is safe or not.
There have been found some dangers to being exposed to loose-fill asbestos insulation. Although these dangers only exist if breathing in dust from the insulation. If the home owner desires to increase their level of insulation in their roof or walls, it is highly suggested to just layer it on top of what is already there.
The popular opinion is that removal is not really necessary. As long as the insulation containing asbestos is left intact it does not really pose major issues to one’s health. Just keep in mind that one should not be crunching around on it or moving it so dust particles become air-born. If removal is desired a professional company will be needed. There are many pieces of equipment that will need to be put in place so that everyone stays safe.
Just because the blown grainy like insulation is in your home does not mean that it contains asbestos. Many of these insulations were perfectly safe and did not contain any harmful contaminants. To be sure the home owner can have the insulation in their attic and walls tested. It is again suggested that this test is left to the experts. They can come and take a sample and remit results in a matter of days.
Insulation helps to keep our homes warm and cozy through the colder months of the year. Making sure that the insulation used in your home is safe testing and asking questions when buying are the sure fire way to keep everyone healthy.
Do you live in a house in Sydney, Australia, or work in an office, that you think may have loose fill asbestos insulation somewhere in the attic or walls? If so, but you have never actually had the property tested, you really should do that.
That is because loose fill asbestos insulation was installed in quite a number of buildings in the Sydney area in the 1960s and 1970s and, if not removed safely, it can cause major health problems.
What is loose fill asbestos insulation? — While you may have heard you might have loose fill asbestos insulation in your home, you might not actually know what it is.
As it sounds, it is a powdery and crumbly type of ground up asbestos that was used to insulate homes, and it is also one of the most dangerous forms of asbestos. If you suspect you may have it in your property, getting rid of it quickly and safely is vital.
Arrange for a test for loose fill asbestos insulation — You can arrange for your property to be tested for loose-fill asbestos insulation by calling a company that specializes in asbestos testing and removal. They will send a licensed asbestos tester to your home and a test, which only takes a few minutes, will be done.
The sample taken will be sent to a laboratory for testing. If it comes back positive for asbestos, then the company will advise you further as to what to do.
How to get rid of loose fill asbestos insulation — If this type of asbestos is detected in your property, the company will make arrangements to remove it safely. This will require you to vacate the property for a day or two while it is tented to make the surrounding area safe for people passing by, and then all the asbestos will be removed.